Low-cost solution for OEM medical use Internal lateral flow solution Etco2 module

Internal Sidestream Etco2 Board for patient monitor(Low cost solution) Product nameInternal Sidestream ETCO2 moduleModelUN-580MOQ1Introduction: The ETCO2 Module is designed for sidestream measurement of ETCO2 using non-dispersed infrared absorption technology. It is used to measure End-Tidal Carbon Dioxide (E

Featured Products

Internal Sidestream Etco2 Board for patient monitor(Low cost solution)
 
Product nameInternal Sidestream ETCO2 module
ModelUN-580
MOQ1

Introduction:
 
The ETCO2 Module is designed for sidestream measurement of ETCO2 using non-dispersed infrared absorption technology. It is used to measure End-Tidal Carbon Dioxide (ETCO2), respiratory rate (RR) , etc. It can deliver a clear, accurate capnogram at all respiratory rates up to 150 breaths per minute. 

With a sampling rate low to 50 mL per minute, it is ideal for use on adult, pediatric and infant patients; patients undergoing procedural sedation; and short- term monitoring of intubated patients using nasal cannulas.
 
Product Characteristics:
 
1.  Fast response, long-term stability, precise output
2.  Special algorithm including temperature, atmosphere pressure and anesthetic compensation
3.  Special design to separate gas line and circuit
4.  Special power supply: stable, security and anti-interference

Technical Specifications:

Transducer Type

Sidestream ETCO2 sensor

Sample Rate

50 mL/min, ±10mL/min.

Principle of Operation

Non-dispersive infrared (NDIR) single beam optics, dual wavelength, no moving parts

Initialization Time

Ø Capnogram displayed in less than 5 seconds

Ø Reaching full specifications within 5 minutes.

ETCO2 Measure Range

Ø 0 - 114 mmHg

Ø 0 - 15%

Ø 0 - 15.2kPa

ETCO2 Resolution 

Ø 0.1 mm Hg    :   0 to 50 mm Hg

Ø 0.25 mm Hg  :  50 to 114 mm Hg

ETCO2 Accuracy

Ø 0 - 40 mmHg      :   ±2 mmHg

Ø 40 - 114 mmHg  :   ±5% of reading

Respiratory Rate 

Ø Range       :    2 to 120 Breaths Per Minute (BPM)

Ø Accuracy   :    ±1 breath

Calibration 

No routine user calibration required

Compensation

Automatic Barometer Pressure 400 - 800 mmHg.

User selectable O2 / N2O compensation.

Voltage Requirements  

5.0 VDC ±5%

Power Consumption

Less than 1.5 Watts typical.

Temperature and Humidity

Operating: 0º to 40°, 10 to 90% RH, non-condensing

Storage:   -40º to 70ºC, <90% RH, non-condensing

Interconnection

Pin out:

1.   TxD           Serial data from LH600

2.   RxD           Serial data from Host

3.   AGND        Analog return

4.   DGND        Digital return

5.   VA              5.0V

Data Interface 

Ø TTL level, bi-directional, 19200 baud rate, standard N-8-1.

Data Output

CO2 gas concentration (mm Hg), End-tidal CO2, Inspired CO2, Respiratory Rate,  
barometric pressure compensation. 

Compensation for O2 (0 - 100%) and N2O (On / Off) when supplied by host.


About us:

New-Portable Medical Hospital Veterinary Electronic Injection Feeding Infusion Syringe Pump

Pls feel free to contact us if you are interested!!! Will always try to reply you within 24 hours after receiving your enquiry.

We are sure we can satisfy you with our full product range, professional knowledge & best after sales support.


Shipping:

DHL, Fedex, TNT, UPS, EMS......

Which ever is convenient for you.


For total weight over 100kgs, shippment by air or by sea is suggested.
Touch Screen Three Channels ECG Machine

Payment:


TT, Paypal & Western union are all fine. 
Capno Emer Wireless Mainstream Capnograph

Contact person:      Shirley

12 Inch Hospital Medical Portable Bedside ICU Multi Parameter Patient Monitor
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours